Gigabyte GA-F2A88X-D3HP User Manual page 62

3-2 Installing the SATA RAID/AHCI Driver and Operating System
With the correct BIOS settings, you are ready to install the operating system.
A. Installing Windows
Step 1:
driver folder under BootDrv in the driver disk depending on your Windows version, for example:
Windows 10 driver folder: "BootDrv\Hw10"
Windows 8.1 driver folder: "BootDrv\Hw81"
Windows 7 driver folder: "BootDrv\Hw7_A88"
Step 2:
Boot from the Windows setup disk and perform standard OS installation steps. When the screen requesting you
to load the driver appears, select Browse.
Step 3:
Step 4:
When a screen as shown in Figure 1 appears, select AMD-RAID Controller and click Next to load the driver
and continue the OS installation.
Figure 1
- 62 -