Gigabyte GA-F2A88X-D3HP User Manual page 19

Combining the onboard GPU with a discrete graphics card, AMD's Dual Graphics technology can provide
Dual Graphics system.
A. System Requirements
- AMD A series processor
-
- An AMD Dual Graphics technology-supported motherboard and correct driver
-
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install an AMD Dual Graphics technology-supported
graphics card on the PCIEX16 slot. Plug the monitor cable into the graphics card and start up your computer.
Step 2:
Enter BIOS Setup to set the following items under the Peripherals\GFX Con guration menu:
- Set Integrated Graphics to Force.
- Set UMA Frame Buffer Size to 512M or above.
After installing the graphics card driver in the operating system, go to the
AMD VISION Engine Control Center. Browse to Performance\AMD
Radeon ™ Dual Graphics and ensure the Enable AMD Radeon Dual
Graphics check box is selected.
installed.
Procedure and driver screen for enabling the AMD Dual Graphics technology may differ by graphics
- 19 - Hardware Installation