Gigabyte GA-F2A88X-D3HP User Manual page 59

The selection bar will move to the Disks section on the right of the screen. Select the hard drives to be included
drive will be shown in green. To use all of the hard drives, simply press <A> to select all. Then press <Enter>
and the selection bar will move to the User Input
RAID0: Stripe set - distributes space across disks for higher performance
Arrays
Create Array
Disks: 0, 1
Type: RAID 0
User Input
Select Array Type to Create
RAID5 RAID10N
RAID0 RAID1N
RAID1 Volume
RAID10 RAIDABLE
RAID50
being installed. Then follow the on-screen instructions to specify the array size. You can select All available space
Arrays
Create Array
Disks: 0, 1
Type: RAID 0
Total Size: 158GB
User Input
Choose Size to Make Array
Size Chosen: All available space
DOS Size: 147GB
Exactly: 158, 892, 818, 432
Disks
0-00, 79GB, Ready
1-01, 79GB, Ready
Available Keys
< >< >< >< >=Choose, <Esc>=Back
<Enter>=Select Menu Item
Figure 10
Disks
0-00, 79GB, Ready
1-01, 79GB, Ready
Available Keys
<PAGEUP>< ><PAGEDOWN>< >=Change Size
<Enter>=Complete, <Esc>=Go Back
Figure 11
- 59 -