Software Update; Installing The Software Update Automatically - Bosch XA1504A5HW User Manual

Press Start.
2.
a The calibration screen appears.
Then the touch display shows "Cal-
ibration complete. You can now re-
move the cover cap."
Remove the cover cap.
3.
Press OK.
4.
a The main menu appears.
a The appliance is now ready for
use.
Calibrating the appliance manually
Pull downwards to open the status
1.
bar in the main menu.
Press in the status bar.
2.
a The Settings menu opens. If calib-
ration was not skipped previously,
open the Calibration menu item in
the Settings manually.
Place the cover cap on the sensor.
3.
Press Start calibration.
4.
a The calibration screen appears.
Then the touch display shows "Cal-
ibration complete. You can remove
the cover cap."
Remove the cover cap.
5.
Press OK.
6.
a The main menu appears.

Software update

Software updates will further optimise
your appliance and add new func-
tions.
Installing the software update
automatically
On start up, the appliance searches
for new software updates.
Requirement: The touch display
shows "New software update is avail-
able. Do you want to update?"
Press Update.
▶
If the battery level is less than
75%, the touch display shows
"Connect your device to the char-
ger." Connect the charger.
→ "Charging the appliance",
Page 36
a The software update will be in-
stalled and the appliance restarts.
Software update en
37