Table of Contents
Advertisement
Symbol
Before using for the
first time
Prepare the appliance for use.
Scope of delivery
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer from whom you purchased
the appliance or our after-sales ser-
vice.
The following are included with the
appliance:
¡ X-Spect
¡ Cover cap
¡ Charging cable
¡ Storage pouch
¡ Quick start guide
¡ Warranty card
Unpacking and preparing the
appliance for use
Prepare the appliance for use.
CAUTION
!
Hazard due to incorrect use
Only charge the appliance using
▶
the charging cable included.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Explanation
Error message
An error has occurred
on the appliance.
→ "Notification mes-
sages", Page 32
→ "Calibrating the ap-
pliance manually",
Page 37
Before using for the first time en
Do not charge the appliance at
▶
temperatures below 0 °C or above
40 °C.
Remove all the packaging material
1.
and protective sleeves from the
appliance.
Check the appliance for visible
2.
damage.
If
is blinking, charge the appli-
3.
ance.
→ "Charging the appliance",
Page 36
Perform the initial setup
4.
→ Page 33.
Performing the initial setup
When switching on for the first time
or after resetting to factory settings,
you must pair the appliance with the
companion app and your washing
machine.
Requirements
¡ You have access to a WiFi home
network (Wi-Fi
¡ You now have a Home Con-
nect account.
¡ Your washing machine is connec-
ted to your Home Connect account
connected.
Note: You can find information
▶
about the app on our Home Con-
nect website: www.home-con-
nect.com.
Couple the appliance with the
Home Connect account and your
washing machine.
→ "Automatically pairing the appli-
ance", Page 34
The companion app and the appli-
ance guide you through the indi-
vidual steps of the pairing.
1
).
33
Advertisement
Chapters
Table of Contents
