Sending A Washing Program To The Washing Machine - Bosch XA1504A5HW User Manual

a The touch display shows the com-
position of the fabric.
To scan another item, touch Res-
4.
can.
To close the quick fabric analysis,
5.
touch Close.
a The main menu appears.
Using Clean a stain
In the main menu, select the Clean
1.
a stain function.
a The touch display shows "Hold the
scanner tight against the stain and
scan."
Hold the sensor to the stain and
2.
press Scan now.
a The appliance scans the stain.
Then the touch display shows
"Hold the scanner tight against the
fabric and scan."
Hold the sensor to the fabric and
3.
press Scan now.
a The appliance scans the fabric and
analyzes the stain. The touch dis-
play then shows a confirmation
and the composition of the stain. If
no pretreatment is required, the
touch display shows "Regular dirt".
Touch Start treatment.
4.
a The appliance runs through the
guide steps for stain removal.
Remove the stain by following the
5.
guide step by step.
Using Treat multiple items
In the main menu, select the Treat
1.
multiple items function.
a The touch display shows "Hold the
scanner tight against the fabric
and scan."
Hold the sensor to the fabric and
2.
press Scan now.
To add a stain to the scanned fab-
ric, press Add stain. Then scan the
stain and follow the instructions for
stain removal or press Skip to skip
stain removal.
a The touch display shows "The item
was added to your wash load."
Press Scan more.
3.
Repeat the process.
4.
If the scanned fabric for the current
wash load is not suitable or stains
have to be removed, the touch dis-
play shows a notification message.
→ "Notification messages",
Page 32
Press Finish to confirm the wash
5.
load.
a The appliance analyses the
scanned fabrics.
Select the type of fabric and press
6.
Next.
If no type of fabric is to be selec-
ted, press Skip.
Press Send washing program to
7.
the washing machine → Page 35
or press Close to end the process.
a The main menu appears.
Sending a washing program
to the washing machine
Requirement: The appliance displays
the recommended washing program.
→ "Using Treat multiple items",
Page 35
Check the recommended washing
1.
program.
Navigate through the display using
a vertical swipe gesture.
Press Send to washer.
2.
a The washing program is sent to
the washing machine but not start-
ing manually. A sending confirma-
tion is then displayed.
Press Close.
3.
a The main menu appears.
Basic operation en
35