Cleaner Head; In The Box - Dyson v8 User Manual

In the box

Your machine will come with one or more of these
cleaner heads – not all will be included.
Vacuum cleaner
The charger is a one
A rectangular dock that
piece unit with the plug,
needs to be fixed to
connector end and cable.
a wall with screws.
Wall dock Charger
The Dyson cordless Charges your vacuum
with or without a dock.
vacuum drops into the
wall-mounted charging
dock, ready for your
next clean.
Some tools may not be included.
You can buy additional tools at www.dyson.com.
This tool has
a combination
of brush head
and crevice tool
together in one
unit. The brush
head slides down
the crevice tool
when needed.
Combination tool Crevice tool
Two tools in one – wide Engineered for precise
nozzle and brush, cleaning around tricky
for quick switching edges and into hard-to-
between cleaning and reach narrow spaces.
dusting tasks around
your home or car.
A wide,
triangular
shaped
Fabric and Extension hose
nozzle.
mattress tool
Adds up to 24 in of
Removes dust, dirt flexible reach to any tool
and allergens from attachment, to clean up
high or down low in your
mattresses and
upholstery. home or car.
A brush bar located inside
the cleaner head and
a suction control slider
located on the front.
Main body
showing the
handle and
bin attached.
Motorbar™ cleaner head
De-tangling vanes
automatically clear
wrapped hair from the
brush bar as you clean.
The narrow connector end at the top, this connects to the bin
and the wider end at the bottom that connects to the cleaner
head or tool.
Wand
A small cleaner head
with an angled body
housing the motor and
an electrical connector
to attach to the wand or
directly to the machine.
A long tool
with an
angled end.
Hair screw tool
De-tangling conical
brush bar spirals hair
off and into the bin.
Motor-driven cleaning
for smaller spaces.
A flexible hose
engineered from
tough wire and
durable plastic.
A soft fluffy brush bar
housed within the
cleaner head. There is
an electrical connecter
end that can attach to
the end of the wand or
directly to the machine.
Fluffy™ cleaner head
Soft woven nylon removes
large debris, while
anti-static carbon fiber
filaments extract fine
dust from hard floors.
A small cleaner head
with a body housing the
motor and an electrical
Pliable bristles and
connector to attach to
felt bumper strip on
the wand or directly to
a narrow, tapered tool.
the machine.
Mini motorized tool Soft dusting brush
Motorized brush bar, Enclosed in a skirt
concentrated in of soft nylon bristles
a smaller head to for gentle, vacuum-
remove stubborn assisted dusting of
dirt from mattresses, delicate objects
upholstery and stairs. and surfaces.
A short nozzle with
stiff bristles on the
underside.
Stubborn dirt brush
Stiff nylon bristles
dislodge ground-in dirt
from coarse carpets,
high traffic areas and
car interiors.