Advertisement
Quick Links
09/01/95
S
emi-Automatic
All Hale products are quality components: ruggedly designed, accurately machined, precision inspected, carefully assembled
and thoroughly tested. In order to maintain the high quality of your unit, and to keep it in a ready condition, it is important to
follow the instructions on care and operation. Proper use and good preventive maintenance will lengthen the life of your unit.
ALWAYS INCLUDE THE UNIT SERIAL NUMBER IN CORRESPONDENCE.
HALE PRODUCTS, INC. A Unit of IDEX Corporation 700 Spring Mill Avenue Conshohocken, PA 19428 TEL: 610-825-6300 FAX: 610-825-6440
MANUAL P/N 029-0020-33-0, REV A, © 1995 HALE PRODUCTS, INC., PRINTED IN U.S.A.
Model SPV
INSTALLATION AND
MAINTENANCE MANUAL
Hale Products cannot assume responsibility for product failure resulting from improper maintenance
or operation. Hale Products is responsible only to the limits stated in the product warranty. Product
specifications contained in this material are subject to change without notice.
P
riming
V
alve
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Idex HALE SPV
Summary of Contents for Idex HALE SPV
- Page 1 ALWAYS INCLUDE THE UNIT SERIAL NUMBER IN CORRESPONDENCE. HALE PRODUCTS, INC. A Unit of IDEX Corporation 700 Spring Mill Avenue Conshohocken, PA 19428 TEL: 610-825-6300 FAX: 610-825-6440 MANUAL P/N 029-0020-33-0, REV A, © 1995 HALE PRODUCTS, INC., PRINTED IN U.S.A.
-
Page 3: Table Of Contents
WARRANTY ....................14 NOTE TO SYSTEM INSTALLER IMPORTANT: Please provide two copies of the Hale SPV manual to the end user of the equipment. For additional manuals, contact Hale Products, Inc at (610) 825- 6300. Ask for Manual P/N 029-0020-33-0. -
Page 5: Safety
SAFETY IMPORTANT NOTICE: Before attempting installation and maintenance of the Hale SPV read and follow all safety precautions listed below. The warnings and cautions listed are necessary for the safe installation or maintenance of the Hale SPV. When developing departmental apparatus maintenance procedures make sure the warnings and cautions are incorporated as written. -
Page 6: Description
Hale SPV on booster and volute type operator panel of the apparatus. There are NO pumps. The installer must also supply hose... - Page 7 Hale SPV Universal Mount Installation Kit: Kit contains the components necessary for installing the Hale SPV on a volute type or booster pump. The kit contains a Hale SPV Valve assembly, Universal Mounting Adapter, Panel Placard, Push-button Switch and Installation Manual.
-
Page 8: Installation
INSTALLATION When ordered as an option on a new midship fire pump the Hale SPV valve assembly is already attached to the pump body with the vacuum hose connected to the priming pump when the primer is ordered mounted to the gearbox. All that remains after the midship pump is mounted on the apparatus frame is to install the panel placard and push-button on the pump operator panel and make the electrical connections from the switch to the battery and priming pump solenoid. - Page 9 1. Carefully locate the position of the push- switch. button switch on the operator panel. 9. Test operation of the Hale SPV and priming 2. Drill or punch a 0.64 inch (16 mm) diameter pump. Conduct vacuum and hydrostatic hole in the panel.
- Page 10 The outer surface of the spacer must be flat Retrofit Installation: to allow proper installation of the panel When installing the Hale SPV as a retrofit on a placard push-button switch. Use material midship fire pump the following procedures shall thickness and fastening devices that leave a be followed.
- Page 11 STRAINER SEAL RING HALE SPV ASSEMBLY -14 x 1- INCH LONG STUD (2) -14 NUT (2) DIAPHRAGM COVER DRAIN PRIMING HOSE CONNECTION USE ¾ INCH (19 mm) INSIDE DIAMETER HOSE Figure 5. Hale SPV Valve Installation on Midship Fire Pump...
- Page 12 Hale SPV Installation with Universal Mounting Adapter: When installing the Hale SPV assembly with a universal mounting adapter use the following procedures. (98 mm) 1. Place the apparatus out of service in accordance with departmental procedures. CAUTION: Make sure the Hale SPV is...
- Page 13 PRIMING HOSE CONNECTION DRAIN USE ¾ INCH (19 mm) INSIDE DIAMETER HOSE Figure 8. Hale SPV Valve Mounting Using Universal Adapter position. to prevent chaffing and abraision. 7. Apply a light coating of thread locking 9. Install a fitting on the side opposite the Hale compound (Loctite #290 or equal) to the SPV on the universal adapter.
-
Page 14: Maintenance
Performance degradation can result from a ruptured diaphragm or worn seat on the valve. A Hale SPV repair kit that contains a manual, seal ring, valve and diaphragm is available from Hale Products, Inc. The repair kit part number is 546-1680-00-0 Hale SPV Test Procedures: connection on the valve body. - Page 15 When removing or installing these parts make sure they are restrained and spring tension is released slowly. 16. With the Hale SPV on a stable surface, place the diaphragm plate over the spring and press down to compress spring. While...
-
Page 16: Parts List
emi-Automatic riming alve PARTS LIST ITEM PART NUMBER DESCRIPTION 340-0640-00-1 3/4 ID HOSE (AEROQUIP 2556-12 or EQUAL) 14 110-1800-02-0 NUT, 7/16-14 ZINC PLATED 018-8040-00-0 STUD, 7/16-14 X 1-3/4 IN. LG. ZINC PLATED 010-0040-00-0 ZMQ-329H PRM VALVE STRAINER 040-2260-00-0 40-4N200 RING-SEAL 018-1406-07-0 SCREW, 5/16-18 X 3/4 IN. - Page 17 Hale SPV Repair Kit A repair kit is available from Hale Products, Inc. The repair kit contains components that require replacement when the Hale SPV is removed from the pump and disassembled. REPAIR KIT PART NUMBER: 546-1680-00-0 The repair kit contains the following components. Refer to the exploded view on the previous page for parts identification.
-
Page 18: Warranty
emi-Automatic riming alve WARRANTY LIMITED WARRANTY EXPRESS WARRANTY. Hale Products Inc. (“Hale”) hereby warrants to the original buyer that products manufactured by it are free of defects in material and workmanship for two (2) years or 2000 hours usage, whichever shall first occur. The “Warranty Period” commences on the date the original buyer takes delivery of the product from the manufacturer.
Need help?
Do you have a question about the HALE SPV and is the answer not in the manual?
Questions and answers