Mitsubishi Electric MR-WX60F Operating Instructions Manual page 36

Other Issues
Checking the Illumination of the 3-Color LEDs in the Vegetable Compartment
Cancel the Vitamin Factory Fresh setting.
Open the vegetable compartment door.
With the door opened, set Vitamin Factory Fresh.
The LEDs illuminate one color at a time (for around 4 minutes).
* Because the light is strong, do not look directly at the LEDs.
After checking the illumination of the LEDs, close the door.
When the door is closed, the foods are preserved with Vitamin Factory Fresh.
For More Precise Temperature Control
The temperature can be set in 19 levels for the refrigerator compartment and freezer compartment, and 24
levels for the supercool freezing compartment (5 levels when set to SOFT FRZ and 19 levels when set to FRZ).
● When temperature fine adjustment mode is set, the compartment display blinks around once every 10
seconds.
Activating temperature fine adjustment mode
Touch
Touch
perform temperature fine adjustment for.
Touch
(5 seconds or longer).
● The refrigerator compartment, freezer
compartment, and supercool freezing
compartment can be set with a single operation.
To cancel
Cancel by performing the same operation
as above.
Refrigerator compartment, freezer compartment, and supercool
freezing compartment (FRZ setting)
Temperature setting
1
2
3
4
5
6
● If supercool freezing compartment is set as "19" of freezer setting, then the temperature in the Freezer compartment
Notes
36 36
to illuminate the icons.
and select the compartment to
until the buzzer sounds twice
7
8
9
10
11
12
13
will be automatically set as "10" ("1" to "9" setting will not be available).
(Continued)
 Page 23
(Temperature Fine Adjustment Mode)
Making temperature fine adjustments
Touch to illuminate the icons.
Touch and select the compartment to perform
temperature fine adjustment for.
Touch repeatedly and make fine adjustments to the temperature.
Display example: When the refrigerator compartment is
set to Temperature setting 5
14
15
16
17
18
19
* indicates blinking.
* For the temperature of the supercool freezing compartment, SOFT FRZ
setting and FRZ setting can be set in sequence.
[REF] blinks around
once every 10 seconds.
[H] blinks.
Supercool freezing compartment
(SOFT FRZ setting)
Temperature setting
1
2
3
4
5