Mitsubishi Electric MR-WX60F Operating Instructions Manual page 31

When installing parts, follow the removal procedure in the reverse order.
Glass Shelf (Upper) (Middle)
Lift the front side of the shelf using both hands.
Pull out to the front.
If you pull it too forcefully toward you, you may scratch
the side surface of the door. Pull the shelf out slowly.
Using the gap between the refrigerator compartment
and door, rotate the glass shelf (upper) and remove it
from the refrigerator.
* The illustration shows the glass shelf (upper).
The glass shelf (middle) is the same.
Slide Glass Shelf (Front) (Back)
Slide out the projections on the front and back of the
slide glass shelf (front) along the grooves.
Projection
Groove
Use both hands and lift up the slide glass shelf (back)
while pulling it toward you, sliding out the projections
along the grooves.
Projection
Grasp the front side and
back side of the slide glass
shelf (back), and pull it out
while lifting the front side up.
Under the conditions in
slide glass shelf (back) out one
side at a time and remove it from
the refrigerator.
Do not let the glass doors, shelves, or
pockets to strong impact.
Doing so may break the parts or cause them to
Prohibited
fall off, resulting in injury.
Be sure to securely remove and install
shelves, pockets, and other parts.
Parts which are not securely installed may fall
Follow the
off, causing injury.
instructions
Groove
, pull the
31