Table of Contents
Advertisement
HeliCommand 3A
•
Stabilises all horizontal control movements: inclination (tilt), speed, position
•
Auxiliary „pilot" channel for adjusting stabilisation effect and switching
between horizontal mode and position mode
•
Integral heading-lock (AVCS) gyro
•
Second auxiliary channel ("AUX channel") for gyro gain and mode,
optionally for automatic trim.
•
Internal swashplate mixer
•
Can be configured without connection to a PC by simple learning procedure,
for up to 3 head servos
•
Fail-safe if radio link fails (PPM / FM only): switches to position stabilisation,
coll.pitch to 'hold'.
•
Suitable for internal-combustion and electric-powered helicopters
•
Can be used indoors and in the open air
•
PC adaptor available as accessory, for setup of 4 head servos, optimisation
for stabilisation and tail gyro, and additional options like automatic trim,
freewheel function for forward flight, etc.
HeliCommand 3D
Includes all the features of the basic "3A" version, plus:
•
Horizontal stabilisation for inverted flying
•
Expanded set-up facilities via PC adaptor (No. 84942000) (additional Expert
settings for optimising the tail gyro, 3D mode and control characteristics).
4
Advertisement
Table of Contents
