Table of Contents
Advertisement
Pilot channel
We recommend that you use this auxiliary channel as it enables you to switch
between the three modes, and also to set the desired stabilisation power.
It is advisable to use a slider or a three-position switch with selectable output
values for the pilot channel. If the pilot channel is not connected to the recei-
ver, a pre-set value applies which is: position mode with a setting of +70%;
this is a suitable setting for many models, and can be changed to any value
you like using the PC adaptor. .
You may of course exchange up with down side, by reversing transmitter
setting or slider mounting.
10
Slider more towards the center
reduces the sensor gain and slows
down the corrections.
Additionally, the auto pilot can be
overridden by smaller stick deflections.
Advertisement
Table of Contents
