Vissani MD1821IM Use And Care Manual page 9

Installation Instructions - ( Bottom mount freezer )
Remove the drawers and
1
freezer compartment door
□ Remove the drawers from the freezer compartment.
Remove the small screws on both sides of the guide rail
of the freezer compartment door, then remove the freezer
compartment door, with the guide rail support, from the
guide rail.
Remove terminal cover and
3
ice maker mounting screws fixed
□ Remove the terminal cover from the upper left corner of
the freezer compartment, then remove the ice maker
mounting screws from the accessory bag and attach them
loosely to the two mounting holes in the back of the
freezer compartment.
Insert the connection plate into the
2
ice maker unit
□ Remove the ice maker unit and the connection plate from the
accessories bag, then insert the connection plate into the ice
maker unit (as shown below) by aligning the connection plate
with the notch in the ice maker unit.
4
Fixed ice maker
□ Insert the power connector of the ice maker into the socket
in the freezer compartment, then loosely mount the ice
maker onto the ice maker mounting screws. Move the ice
maker to the left as far as it will go, then align it vertically
and tighten the ice maker mounting screws.
9
Please contact 1-855-847-7264 for further assistance.
HOMEDEPOT.COM