Required Tools; Important Note; Install Ice Maker( Top Mount Freezer ) - Vissani MD1821IM Use And Care Manual

Installation Instructions

REQUIRED TOOLS

□
Electric drill with a 1/4" bit.
□
Putty knife.
□
Needle nose pliers or nut driver.
□
Adjustable wrench.
□
Knife.
□
Flat blade screwdriver.
□
Phillips screwdriver.
□
Ice maker water line kit:
• 1/4" OD copper supply line with compression nuts and ferrules.
• Non self piercing shut off valve.
□
An empty freezer shelf to hold the ice storage bin.
□
Access to a household cold water line with a water pressure between 20 and 120 psi.
□
Important: The ice maker water line kit includes the copper tubing and shut off valve and it is not provided. It can be purchased from
most hardware or plumbing supply stores.

IMPORTANT NOTE

There are two water inlet tubes provided with this installation kit for two different applications. For the installation of this ice maker kit,
ensure you are using the water inlet tube with the shorter hose and the screw holes that are closer together. The screw holes should
match up with the holes on the back of the cabinet.
INSTALL ICE MAKER
Ensure that the refrigerator is unplugged and the freezer shelf and ice tray rack are removed from the freezer before beginning an
installation process.
4