Vissani MD1821IM Use And Care Manual page 10

Installation Instructions - ( Bottom mount freezer )
Reinstall the drawers and
5
freezer compartment door
□ Reinstall the freezer door guide rail and replace the
freezer drawers, then place the ice storage bin in the
top freezer drawer.
Remove the thermal insulation
7
foam strip
□ Use needle nose pliers to remove the thermal insulation
foam strip from the hole you just exposed.
Remove the label and then remove
6
the foam
□ Peel the label off the water hole on the back of your
refrigerator.
Fixed Sealed silica gel block and
8
water pipe joint
□ Remove the water tube connector, silicone seal, long water
supply tube, and white head screw from the accessory bag,
then assemble the parts by aligning the notch on the silicone
seal with the notch on the water tube connector, inserting one
end of the water supply tube into the quick change sealing ring
at the bottom of the connector. Make sure that all parts are
securely assembled. Insert the water supply assembly into the
water inlet hole on the back of your refrigerator, and secure it
with the long screw from the accessory bag.
10