Table of Contents
Advertisement
Feb 8, 2022
ADJUST THE VOLUME AND BRIGHTNESS
To adjust the volume and screen brightness:
1.
Push Home to go to the Dashboard if
not already there.
2.
Push the Left Arrow button to go to
the nanobox Config screen.
3.
Use the knobs to adjust the values of
the Brightness and Volume
parameters.
EXPLORE THE SOUNDS
■ Touch the Preset Name at the top of the Dashboard to select a different preset.
■ Try the Modulation Wheel on your MIDI Controller with different presets to add
sometimes subtle, sometimes surprising effects.
■ Turn the knobs on the dashboard and drag your finger on the X/Y Modulation
Grid to explore how each preset uses the X and Y modulators.
■ Set the Line Thru amount on the nanobox Configuration screen to control how
much of the Line Input signal is sent to the FX engine.
Copyright 1010music LLC 2022
nanobox | fireball User Guide v 1.0.10
Page 9 of 55
Advertisement
Table of Contents
