New Cartridge Priming - ageLOC Me User Manual

NEW CARTRIDGE PRIMING

Any time you insert new cartridges, the device will ask you if the cartridges are
new or not. This is to enable it to properly track the doses remaining in each
cartridge. The device automatically primes new cartridges with extra pump
strokes the first time they are dispensed to get the product flowing. Therefore,
it is critical that you make the correct selection when the device asks if the
cartridges are new or not, to prevent excess product from being delivered.
If the cartridges are new, YES will be the default value.
Press the Select button ( ) to confirm.
If you insert cartridges but have not reached the end of a 30-day
cycle, NO will be the default value.
Press the Select button ( ) to confirm.
After you insert new cartridges, the device will prime your products. You will
hear the device pump a few times before it dispenses each product. Make
sure to keep your fingertips in the archway during the whole priming process.
The device will deliver the product you primed onto your fingertips.
You may receive a slightly different dose of your product than usual during
this process, but each subsequent delivery will provide an accurate dose for
your month supply.
8
BUTTON SYMBOLS
LEFT
ON-SCREEN SYMBOLS
DAY MOISTURIZER
RIGHT BACK
NIGHT MOISTURIZER
SELECT/CONFIRM
SERUM