NEW CARTRIDGE PRIMING
Any time you insert new cartridges, the device will ask you if the cartridges are
new or not� This is to enable it to properly track the doses remaining in each
cartridge� The device automatically primes new cartridges with extra pump strokes
the first time they are dispensed to get the product flowing� Therefore, it is critical
that you make the correct selection when the device asks if the cartridges are new
or not, to prevent excess product from being delivered�
If the cartridges are new, YES will be the default value�
Press the Select button ( ) to confirm�
If you insert cartridges but have not reached the end of a 30-day
cycle, NO will be the default value�
Press the Select button ( ) to confirm�
After you insert new cartridges, the device will prime your products� You will
hear the device pump a few times before it dispenses each product� Make sure
to keep your fingertips in the archway during the whole priming process� The
device will deliver the product you primed onto your fingertips�
You may receive a slightly different dose of your product than usual during this
process, but each subsequent delivery will provide an accurate dose for your
month supply�
9