Table of Contents
Advertisement
4
CLICK
TOP
CLICK
5
CARTRIDGE
CLICK
DEVICE CONNECTOR
6
'CLICK'
SERUM
HOLDER
Insert the Serum Cartridge Set into device.
• Insert the completed set from Step 5 into
front center position of the device.
• The gray bottom of the Device Connector
goes down into the device.
• You will hear a click when the Serum
Cartridge Set is inserted properly.
• Close the lid.
• Confirm that the Day, Night, and Serum
cartridges you inserted are new. Use the
arrow buttons (
product, then press the Select button ( )
so that the device can prime your products.
Attach the three Serum cartridges
to the Serum Cartridge Holder in
any order.
• Insert each Serum cartridge into the
Serum Cartridge Holder BOTTOM
FIRST, then snap the raised corner of
the colored cap under the top ring
until it clicks.
• You might need to slightly wiggle a
cartridge to get it to correctly fit.
Insert the top of the Device Connec -
tor
(white side) into the bottom of the
Serum Cartridge Holder (also white)
until it clicks.
Make sure the Device Connector is
attached to the Serum Cartridge
Holder to complete your Serum
Cartridge Set before proceeding
'CLICK'
to Step 6.
) to select YES for each
'CLICK'
7
Advertisement
Table of Contents
