Table of Contents
Advertisement
12
Troubleshooting
Situation
No picture and sound.
No picture, or poor picture, sound is
OK.
Picture is not in color.
Picture is OK, no sound.
One of the speakers has no sound.
Cannot receive some TV channels
using cable TV.
Want to reset TV settings.
64
Solution
•
Connect the power cord properly.
•
Press the POWER button on the control panel
or remote control.
•
Press the SOURCE button to cycle through
connected video sources.
•
Press the CH UP or CH DOWN button to switch
to other TV stations.
•
Check the TV/CATV OSD settings. See "Taking
Care of Your TV & Remote Control" on
page 63.
•
Make sure all cables are connected properly.
•
Check the antenna and cable connections.
•
Adjust the brightness in the OSD menus. See
"Brightness" on page 35.
•
Adjust the saturation in the OSD menus. See
"Saturation" on page 39.
•
Make sure all cables are connected properly.
•
Make sure the source device is functioning
properly.
•
Make sure the audio cable is connected
securely.
•
Turn the mute off.
•
Press the VOL UP button on the control panel
or remote control.
•
Make sure the MTS option is set to MAIN or
MONO.
•
Adjust the balance in the OSD menus. See
"Balance" on page 46.
•
Make sure the audio cables are connected
securely.
•
Try the Auto Program function in the OSD "TV
Setting" menu. See "Auto Program" on
page 52.
•
Use the Preset function in the OSD Picture and
Audio menu.
Advertisement
Table of Contents
