Using The Remote Control; Using The Favorite Channel Feature - HANNspree MAK-000011 User Manual

Using the Remote Control

Aim the transmitter on the remote control at the remote IR sensor of the TV
and ensure that there are no obstacles between them. The operational
distance may be shortened when the remote IR sensor is directly exposed
to strong light.
For best results, use the remote control within a distance of 16 feet
(5 meters) from the front of the TV. Do not exceed an angle of 30 degrees
when pointing at the TV.

Using the Favorite Channel Feature

Setting:
1
Enter a favorite channel number with the remote control.
2
Press and hold an arrow button for at least 3 seconds, then release
the button.
3
A "suffix number", which corresponds to the arrow buttons as
→ →
(1),
of the channel number) indicating that your "favorite channel button"
is set correctly. See the illustration below.
CH
MAIN SAP MONO
4
Select the next arrow button that you wish to set up or change and
repeat steps 1 to 3 until all the buttons are set.
5
After all four arrow buttons are set to your favorite channels, you may
recall a channel by pressing the corresponding arrow button.
→
(2), (3),
15
1
→
(4), will appear (at the right corner
31