Channel Add/Erase - HANNspree MAK-000011 User Manual

Channel Add/Erase

TV MENU
TV/CATV
CH ADD/ERASE
AUTO PROGRAM
SEL SEL ENTER ENTER
TV
CH UP/DOWN
ERASE ADD
MENU MENU
1
CATV
2
MENU MENU
3
43
Note
You can still access the erased channel by
entering the channel number using the
number buttons on the remote control. Use
the Add Channel steps if the channel was
erased accidentally.
Press the CH DOWN button to select
CH ADD/ERASE.
Press the VOL UP button. The OSD
menu display switches to the
following screen.
Press the CH UP/CH DOWN button
on the front panel to select a
channel.
Add Channel
Then press the VOL UP button on
the front panel to add the selected
channel. The channel number
changes from yellow into green after
adding the channel.
Erase Channel
Then press the VOL DOWN button
on the front panel to erase the
selected channel. The channel
number changes from green into
yellow after erasing the channel.
51