G&G TJ3KY-0.1 Operating Manual page 9

5.1.4 Unit weight setting
In the numbers input status, press the "UNIT W.T." key to set the
current input as unit weight.
When the unit weight of the article to be weighed is known, key-in
the unit weight value of the article to be weighed, then press the
"UNIT W.T." key, (If no key is pressed for entering after 5s when
numbers are keyed in, the entered number in the unit weight window
is deemed as the unit weight value of the article to be weighed.) and
thus ends the setting and it is in the counting state.
5.1.5 Unit conversion
Press "kg/lb" key and the displayed value for weight display
window switches between "kg" （ kilogram ） and "lb" （ pound ） and the
indicator for relevant unit lights. The unit conversion in the weight
window does not affect the unit in the unit weight window (which is
always in g).
5.1.6 Presetting of quantity
For counting, the upper limit can be preset. For each of the
subsequent counting, alarm is actuated when this limit is exceeded and
"--H--" flickers in the unit weight display window. Key-in the upper
limit of number to be set, press the "QTY PST" key and thus ends the
presetting of the quantity. When the presetting of quantity is "0", the
upper limit can not set. When you press the "QTY PST" key without
9