G&G TJ3KY-0.1 Operating Manual page 13

calibrating
C----H Calibration error, items on the pan or at higher zero point
during calibrating
E----- Storage calibration data error, re-calibration is necessary
o Calibration zero instruction, when the empty of platform,
back to zero shows, if not, it need to be re-calibrated.
g Showing when stability, current weight unit is "g"
kg Showing when stability, current weight unit is "kg"
lb Showing when stability, current weight unit is "lb"
（ 1lb=0.4536kg ）
Battery symbol Instructions of battery when using battery, fully
charged battery shows full grid. When the battery runs low, display
spaces and a warning sound, this time should be charged, if not, it
only work of 1-2 hours. Battery symbol dynamic display when
charging, after filled, the battery symbol is not indicated.
6.2 Unit weight display window displays the following information
-CAL- In the calibration state
≡ X≡ The displayed value is the number of operations for
accumulation. The weight field displays the total weight and the
number-of-pieces field displays the total weight.
H Meaning the preset quantity is exceeded and an audible
warning is given.
13