Serial Communication - G&G TJ3KY-0.1 Operating Manual

Default setting is 6 .
C4---- Communication setting. "TARE" changes the lower unit.
"M+" changes the high unit. This date is the first date during
communication. Default setting is 27.
Holding down the "TARE" and power on , all the parameters can be
reset to default settings, re-calibration before using.

8. Serial communication

8.1 Serial communication protocol: baud rate: 600-9600 can set, the
default settings is 9600; data units: 8 units; ending unit: 1 unit; no
calibration unit.
8.2 Data format: 41-bit data output （ ASCII code ） 。
WT space
2 unit 1 unit
UW space
2 unit 1 unit
QT space
2 unit 1 unit
When data is not negative, the negative unit is space, no showing
data is also space.
For example: weight showing 12.345 kg, unit weight showing 12.34,
negative data
1 unit 7 unit
data
6 unit
data unit
5 unit 4 unit
unit
3 unit
unit enter
2 unit 1 unit
enter
1 unit
enter
1 unit
linefeed
1 unit
15