Section 1: No Power - Pride Q6 Edge Technical Troubleshooting Manual

With q-logic, ne, and ne+ electronics
Hide thumbs Also See for Q6 Edge:
Table of Contents

Advertisement

SECTION 1 - NO POWER
Symptoms:
The batteries are fully charged.
All electrical components are connected correctly.
The power does not turn on when the on/off key is pressed on the NE or NE+ joystick.
The power does not turn on when the on/off mode select lever is deflected on the Q-Logic joystick.
Diagnosis:
The power has been interrupted somewhere in the system.
Solution:
Use the following procedure to find the source of the interruption:
JOYSTICK OFF-BOARD CHARGER PORT
B-
ABOUT
25VDC
CORRECT POLARITY)
Replace the NE, NE+,
or Q-Logic joystick and
retest the system.
B+
LESS THAN 18VDC
(WITH
BUT
GREATER
THAN 0VDC
Recharge the batteries
and retest the system
Remove the front shroud and foot platform.
0VDC
(See Appendix 2.) Unplug the front and rear
battery harnesses from the battery cable, then
go to the next page.
4

Advertisement

Table of Contents
loading

Table of Contents