Page 4
English Install the high pressure hose......4 Description......... 2 10 Operation........... 5 Purpose.............. 2 Product overview..........2 10.1 Connect the water supply to the machine..5 Introduction........2 10.2 Use the gun............5 10.3 Install the nozzle..........5 General power tool safety 10.4 Install the detergent tank........5 warnings..........
English DESCRIPTION • Check the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the machine. PURPOSE • Avoid dangerous environments. Don’t expose to rain. The machine is used to clean vehicles, boats, buildings by the Keep work area well lit.
English SYMBOLS ON THE PRODUCT • Use only recommended accessories. The use of improper accessories may cause risk of injury. Some of the following symbols may be used on this tool. • When servicing use only identical replacement parts. Use Please study them and learn their meaning.
English WARNING SYM- SIGNAL MEANING • If the parts are damaged, do not use the machine. DANGER Indicates an imminently haz- • If you do not have all the parts, do not operate the ardous situation,which, if not machine. avoided, will result in death •...
English OPERATION • Release the gun trigger to stop water flow through the nozzle. WARNING 10.2.1 UNLOCK THE GUN TRIGGER Make sure that all the connections are tight and have no • Push backward the trigger safety button. leakage before operation. 10.2.2 LOCK THE GUN TRIGGER 10.1 CONNECT THE WATER SUPPLY...
English 10.5 START THE MACHINE 11.1 NOZZLE MAINTENANCE Figure 9. Figure 6. If there is too much pump pressure, the nozzle can become CAUTION clogged, you can feel a pulsing sensation while you pull the Do not operate without the water supply connected. gun trigger.
English TROUBLESHOOTING PROBLEM POSSIBLE SOLUTION CAUSE PROBLEM POSSIBLE SOLUTION The water supply Open water suppy CAUSE is not sufficient. fully. Make sure the garden hose is The motor does The power switch Set the power free from block- not start. is off.
(The full warranty terms and conditions can be found on chine. Greenworks webpage) The voltage de- Disconnect the ex- The Greenworks warranty is 3 years on the product, and 2 creases across ex- tension cord, and years on batteries (consumer/private usage) from the date of tension cord.
Page 12
English • is in conformity with the provisions of the following other EC-Directives: • 2006/42/EC • 2014/30/EU • 2000//14/EC&2005/88/EC • 2011/65/EU&(EU)2015/863 Furthermore, we declare that the following (parts/ clauses of) European harmonised standards have been used: EN 60335-1; EN 60335-2-79; EN 62233; EN 55014-1; EN 55014-2;...