Advertisement
Quick Links
Advertisement
Related Manuals for GreenWorks GPW1901SC
Summary of Contents for GreenWorks GPW1901SC
- Page 1 GPW1901SC PRESSURE WASHER OPERATOR MANUAL PWA108 www.greenworkstools.com...
-
Page 3: Table Of Contents
English Description......4 12.2 Install the high pressure hose..7 12.3 Connect the water supply to Purpose...........4 the product........7 Overview......... 4 12.4 Install the spray wand..... 8 Important safety 12.5 Spray tips and nozzle..... 8 instructions......4 Operation........ 8 Electrical safety warnings..4 13.1 Prepare a drip loop...... -
Page 4: Description
English • Do not operate the product while under the influence DESCRIPTION of drugs, alcohol, or any medication. • Do not wear loose clothing, gloves, neckties, or PURPOSE jewelry. They can get caught and draw you into The product is used to clean vehicles, boats, buildings, moving parts. -
Page 5: Pressure Washer Safety Warnings
English • If the supply cord is damaged, it must be replaced GROUND FAULT CIRCUIT INTERRUPTER by the manufacturer or its service agent or a PROTECTION similarity qualified person in order to avoid a hazard. • This pressure washer is provided with a ground-fault •... -
Page 6: Child Safety
English the receptacle before disconnecting the product Symbol Explanation from the extension cord. Always wear safety goggles or CHILD SAFETY safety glasses with side shields and, as necessary, a full-face It is crucial to be aware of the presence of children to shield when operating this prod- prevent injury. -
Page 7: Installation
English SYM- SIGNAL MEANING 12.2 INSTALL THE HIGH PRESSURE HOSE Uncoil the high pressure hose and attach the end DANGER Indicates an imminent- of the high pressure hose to the base of spray ly hazardous situation, gun. Tighten by hand. which, if not avoided, will result in death or serious injury. -
Page 8: Install The Spray Wand
English Turbo rotary nozzle High pres- CAUTION sure Inspect the filter in the water inlet connector before you connect the garden hose Green, gentle lifting and clean- • If the filter is damaged, do not use the product until the filter is replaced. •... -
Page 9: Start The Product
English Set the power switch to the “ON” ( | ) position. WARNING Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools, or other obstructions while you are working with a power tool. -
Page 10: Install The Soap Applicator
English Note: If you do not use the product, point the spray MAINTENANCE gun in a safe direction, and squeeze the trigger to relieve built up pressure in the product. WARNING 13.4 INSTALL THE SOAP APPLICATOR Before maintenance, make sure that you •... -
Page 11: Spray Tip Maintenance
English The product is protected when the protector fluid TRANSPORTATION AND STORAGE exits the water outlet. WARNING Disconnect the power cord and water supply hose before transportation and storage. 15.1 MOVE THE PRODUCT • Point the spray wand in a safe direction. •... -
Page 12: Troubleshooting
English TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION The motor does not start. The power button is in the "OFF" (O) Set the power switch to the “ON” ( | ) position. position. The power cord is not plugged in. Connect the power cord to the pow- er supply. -
Page 13: Technical Data
90 days requested in writing by Greenworks. from the shipping date or in-store purchase date. All sales are final, no returns. - Page 14 English USA address: Greenworks Tools P.O. Box 1238, Mooresville, NC 28115 Canadian address: Greenworks Tools Canada, Inc. P.O. Box 93095, Newmarket, Ontario, L3Y 8K3 Mexico address: TECNOLOGIA CAMPO Y JARDIN S.A. DE C.V. ADMINISTRADORES No. 5336 A, COL. ARCOS DE...
- Page 15 www.greenworkstools.com Rev B2...
Need help?
Do you have a question about the GPW1901SC and is the answer not in the manual?
Questions and answers