Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
RETURNS NOT ACCEPTED
& WARRANTY VOID
if Sprayer is not properly cleaned
immediately after every use.
Clean Sprayer immediately after
use to prevent permanent damage.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21d
Advertisement
Table of Contents
Related Manuals for Avanti 57568
Summary of Contents for Avanti 57568
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Instructions
Do not operate light switches, engines, or similar the pump, hose assembly, spray gun, and spark producing products in the spray area. j. Keep area clean and free of paint or solvent Page 2 For technical questions, please call 1-888-866-5797. Item 57568... -
Page 3: Work Area
Paint thinners and solvents may be harmful if inhaled. 4. Keep bystanders, children, and visitors away while operating the tool. Distractions are able to result in the loss of control of the tool. Item 57568 For technical questions, please call 1-888-866-5797. -
Page 4: Electrical Safety
4. Store the tool when it is idle out of reach be controlled with the switch is dangerous and of children and other untrained persons. must be repaired. A tool is dangerous in the hands of untrained users. Page 4 For technical questions, please call 1-888-866-5797. Item 57568... -
Page 5: Specific Safety Instructions
Do not spray pesticide, acid, cord plug clean and paint-free. corrosive material, fertilizer, or toxic chemicals. 8. Do not run Paint Sprayer while empty. Damage to the unit may occur. Item 57568 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Page 6 For technical questions, please call 1-888-866-5797. Item 57568...
-
Page 7: Grounded Tools: Tools With Three Prong Plugs
150% of sure it is marked with the suffix “W-A” (“W” in the rated amperes. Canada) to indicate it is acceptable for outdoor use. Item 57568 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Do not use solvents improperly. Specifications Electrical Input Maximum Working Pressure Spray Hose Outlet TIP CHART Oil-Based Water-Based Primer & Primer & Interior Exterior Thick Stain Size Enamel Stain Paint Paint Paint Page 8 For technical questions, please call 1-888-866-5797. Item 57568...
-
Page 9: Components And Controls
Assembly Diagram near the end of this manual. Components and Controls Power Switch Pressure Knob Spray Hose Outlet Suction & Power Priming Hose Cord Storage Hook Prime/Spray Priming Suction Valve Hose Hose Item 57568 For technical questions, please call 1-888-866-5797. Page 9... - Page 10 • Remove filter by turning it counterclockwise. • Replace filter and reassemble Spray Gun. Filter Handle Secure wrench on flat spots Attach Spray Gun Attach Spray Gun to Spray Hose. Tighten securely with two included wrenches. Page 10 For technical questions, please call 1-888-866-5797. Item 57568...
- Page 11 8. Press Trigger until pressure is relieved, then release and lock Trigger. 9. Rotate Spray Tip to SPRAY position. 10. Rotate PRIME/SPRAY Valve to PRIME position when Sprayer not in use. Item 57568 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Pressure Knob clockwise until it starts. Priming f. When solvent begins to flow out of Hose Priming Hose, turn Power Switch off. 9. Prime with paint according to Prime with Paint on page 13. Waste Page 12 For technical questions, please call 1-888-866-5797. Item 57568...
- Page 13 10. Remove Priming Hose from solvent Waste container and place into paint container. Paint 11. Spray paint according to Spraying on page 15. NOTE: Dispose of solvent, paint and waste according to local hazardous waste standards. Item 57568 For technical questions, please call 1-888-866-5797.
-
Page 14: Accessories And Replacement Parts
Inlet Valve Repair Kit Pressure Switch Repair Kit Outlet Valve Repair Kit *In the event that the supplied hose assembly is required to be replaced, replace only with Harbor Freight replacement hoses. Page 14 For technical questions, please call 1-888-866-5797. Item 57568... - Page 15 NOTE: Dispose of solvent, paint and waste contacting the workpiece. according to local hazardous waste standards. When finished with the stroke, release the Trigger while still moving the Spray Gun and after passing the workpiece. Item 57568 For technical questions, please call 1-888-866-5797. Page 15...
- Page 16 10. Place Nozzle Guard, Spray Tip and b. Unplug Sprayer. c. Remove Hoses from containers. • Soap and water for water-based paint. d. Let Hoses dry completely before storage. • Mineral spirits for oil-based paint. Page 16 For technical questions, please call 1-888-866-5797. Item 57568...
- Page 17 10. Attach Garden Hose Adaptor (sold separately) to Suction Tube, then attach garden hose to Adaptor. Item 57568 For technical questions, please call 1-888-866-5797. Page 17...
-
Page 18: Long Term Storage
4. Store in clean dry location out of reach of children. • • damaged Nozzle Guard or Spray Tip, • damaged Spray Hose, • cracked or broken parts, and • any other condition that may affect its safe operation. Page 18 For technical questions, please call 1-888-866-5797. Item 57568... -
Page 19: Replace Pump
5. Connect Transfer Hose to new Pump. Push new Pump in place, adjust Piston Rod as necessary to fit. Cover Clamp Piston Pump 6. Replace Suction Hose, tighten nut by hand. Item 57568 For technical questions, please call 1-888-866-5797. Page 19... - Page 20 2. During cleaning or changing tip size: Remove SPRAY Spray Tip from Nozzle Guard, then remove Nozzle Guard from Spray Gun. Insert Spray Tip into front of Nozzle Guard to remove Seal. Page 20 For technical questions, please call 1-888-866-5797. Item 57568...
-
Page 21: Troubleshooting
Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available Item 57568 For technical questions, please call 1-888-866-5797. Page 21... -
Page 22: Parts List
120V 900W DC Brushed Motor Stator Hose Storage Double-Headed Long Screw Ø5 Spring Washer 400v 470uf Capacitor Phillips Pan Head Screws M5*0.8-20 Capacitor Bracket Suction Tube Assembly Pressure Relief Pipe Assembly Page 22 For technical questions, please call 1-888-866-5797. Item 57568... -
Page 23: Assembly Diagram
Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Part Description Part Description Clamp Gasket Inner Wire Washer Ø10 Spray Hose Spray Gun Heat Shrink Sleeve Pressure Knob Seat Assembly Diagram Item 57568 For technical questions, please call 1-888-866-5797. - Page 24 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 57568 and is the answer not in the manual?
Questions and answers
Can I get a suction hose for the Avanti 821(57568)?