Avanti 58056 Owner's Manual & Safety Instructions

Avanti 58056 Owner's Manual & Safety Instructions

Airless paint spray gun

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
RETURNS NOT ACCEPTED &
WARRANTY VOID
if Spray Gun is not properly cleaned
immediately after every use.
Clean Spray Gun immediately after
use to prevent permanent damage.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21a

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 58056 and is the answer not in the manual?

Questions and answers

Patricia R Morris
May 12, 2025

I have a leak from the pressure control knob how to fix it

Patricia R Morris
May 12, 2025

I have a leak from the pressure control knlb

Subscribe to Our Youtube Channel

Summary of Contents for Avanti 58056

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2: Important Safety Instructions

    Use only conductive or grounded high-pressure airless paint sprayer k. Fire extinguisher equipment shall be present and working. c. Verify that all containers and collection systems are grounded to prevent static discharge. Page 2 For technical questions, please call 1-888-866-5797. Item 58056...
  • Page 3: Work Area

    A moment of inattention while operating the the risk of injury to persons as a result tool increases the risk of injury to persons. of being caught in moving parts. Item 58056 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 3. Use only lubricants supplied with the by qualified repair personnel. tool or specified by the manufacturer. 2. When servicing a tool, use only identical replacement parts. Use only authorized parts. Page 4 For technical questions, please call 1-888-866-5797. Item 58056...
  • Page 5: Specific Safety Instructions

    9. Read all of the information concerning coating products and cleaning solvents. Do NOT use bleach, low-flash naphthalene, acetone, alcohol or toluene when cleaning Paint Sprayer equipment. Item 58056 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 Have injection injury National pipe thread, straight treated immediately. WARNING marking concerning Risk WARNING marking concerning of Fire. Risk of Eye Injury. Do not use solvents improperly. Wear ANSI-approved eye protection. Page 6 For technical questions, please call 1-888-866-5797. Item 58056...
  • Page 7: Specifications

    Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Attach Spray Gun Attach Spray Gun to Spray Hose. Tighten securely with two wrenches (sold separately). Item 58056 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 8. Press Trigger until pressure is relieved, then release and lock Trigger. 9. Rotate Spray Tip to spray position. 10. Rotate prime/spray valve to prime position when sprayer not in use. Page 8 For technical questions, please call 1-888-866-5797. Item 58056...
  • Page 9 Note: If Spray Tip won’t clear, replace according wave the gun like a fan. to After Every Use - Cleaning on page 10. NOTE: Dispose of solvent, paint and waste according to local hazardous waste standards. Item 58056 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10: User Maintenance Instructions

    11. Remove Handle from Spray Gun 15. Let accessories dry completely. with wrench (sold separately). 16. Reassemble Spray Gun. NOTE: Dispose of solvent, paint and waste according to local hazardous waste standards. Page 10 For technical questions, please call 1-888-866-5797. Item 58056...
  • Page 11 2. During cleaning or changing tip size: Remove SPRAY Spray Tip from Nozzle Guard, then remove Nozzle Guard from Spray Gun. Insert Spray Tip into front of Nozzle Guard to remove Seal. Item 58056 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: Maintenance And Lubrication

    • misalignment or binding of moving parts, • damaged Nozzle Guard or Spray Tip, • cracked or broken parts, and • any other condition that may affect its safe operation. Page 12 For technical questions, please call 1-888-866-5797. Item 58056...
  • Page 13: Troubleshooting

    2. Sand wood to a sufficiently fine grit before painting. 3. Raised grain. 3. Wipe wood surface with thinner to raise grain, then sand with fine grit to knock off “hairs”. Item 58056 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14: Please Read The Following Carefully

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175431288 when ordering parts. Page 14 For technical questions, please call 1-888-866-5797. Item 58056...
  • Page 15: Parts List

    Washer Spring Seal Retainer Handle O-Ring Seal Trigger Guard Clip Washer Swivel Inlet Fitting Needle Pack Trigger Lock Trigger Lock Trigger Spring Trigger Guard Shock Proof Nut Diagram 15 16 Item 58056 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16: Limited 90-Day Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

Table of Contents

Save PDF