Table of Contents
Advertisement
Uncrating Instructions
Tools Needed:
- Gloves
- Safety Glasses
- Safety Shoes
- Tin Snips / wire cutters
- Razor Blade or knife
- (2) large adjustable wrenches
- (2) 10mm wrenches or socket set
- (2) 13mm wrenches or socket set
1. Cut the banding securing the unit to the pallet.
caution when cutting metal straps that they do not
spring toward you and cause injury
2. Remove the hopper, tires, owner's, packages and owner's
manual from the skid and set them in an area where all parts
can be viewed (Fig 3).
3. Cut open main support frame/towing hitch package and
remove zipties then set parts o to the side (Fig 4 & 5).
4. Open white bag of components and set them in an area
where all parts can be viewed (Fig 6 and 7).
5. Open plastic bag of hardware from the white bag and set
in an area where all parts can be viewed (Fig 8).
6. Set all hopper components in an open with area with
room to build the unit (Fig 9).
Visit: www.abisupport.com
Use
(Fig 1 & 2).
Fig 1.
Cut banding
Fig 3.
Fig 4.
Fig 6.
Fig 8.
8
Fig 2.
Cut zipties
White bag of
components
Frame/towing
hitch package
Cut zipties and seperate main
support frame and towing hitch.
Fig 5.
Fig 7.
Fig 9.
Advertisement
Table of Contents
