Table of Contents
Advertisement
Troubleshooting
WARNING: Be sure tractor engine is o , parking brake is
locked, and key is removed before making any adjustments.
PROBLEM
NON UNIFORM SPREAD
PATTERN
SPREADER DISC DOES NOT
TURN
NARROW SPREAD WIDTH
Replacement Parts
All of the Classic Spreader components are considered wear
parts and will need to be replaced as they wear out from
use. To reorder, please contact the ABI Support department
at 877-788-7253.
Recommended replacement parts to be kept on hand to prevent delaying work.
DESCRIPTION
SPREADER DISC
(P/N 46, PG 17)
THREADED BUSHING
(P/N 7, PG 17)
NYLON BUSHING Ø21
(P/N 23, PG 17)
Email: support@abiattachments.com
POSSIBLE CAUSE
OPENING LEVER NOT
POSITIONED CORRECTLY
DRIVE WHEEL BOLT MISSING OR
SHEARED.
SPREADER DISC COTTER PIN
MISSING OR SHEARED.
BROKEN RING OR PINION GEAR.
SLOW GROUND SPEED.
HOPPER TOO FAR BACKWARDS.
QTY
1
1
2
SET LEVER AT GATE OPENING TO THE PROPER
POSITION (SEE "SPREAD ADJUSTMENT" - PG 14)
REPLACE BOLT.
REPLACE COTTER PIN.
REPLACE RING OR PINION GEAR.
INCREASE GROUND SPEED.
POSITION SPREADER SO IT RUNS LEVEL OR INCLINED
SLIGHTLY FORWARD TOWARD THE TOWING VEHICLE.
19
SOLUTION
Call Toll Free: 877-788-7253
Advertisement
Table of Contents
