Table of Contents
Advertisement
Fig 32.
Fig 33.
Mount 1st pivot bracket
to main support frame.
Fig 35.
Fig 36.
Mount 2nd pivot
bracket to main
support frame.
Email: support@abiattachments.com
Spreader disc
Fig 34.
Pivot bracket should be
parallel to spreader disc
when properly mounted.
Slide towing hitch onto pivot
bracket with 2nd pivot bracket
attached to towing hitch.
Angled brackets mounted
to towing hitch.
Fig 37.
Rotate angled brackets (with
multiple holes) until hole at
the end of the angled brackets
line up with holes in the main
support frame.
Fig 38.
Fig 40.
13
Fig 39.
Spreader disc
Angled brackets
w/holes.
Remove and replace
bolts, washers and nuts
to adjust spreader disc
angle.
Call Toll Free: 877-788-7253
Advertisement
Table of Contents
