User Settings And Factory Settings - Yanmar 6LY3 Series Operation Manual

Appendix A: i5601E Digital Display Setup
• The user setting allows for reset of the maintenance timer.
• The factory settings require a password to change.
"Unlocking" the Hot Keys
This is a popular way to expand the use of the i5601E. The default hot keys will remain active but you can select
other data parameters in the various display areas. A right arrow becomes visible over key 5. Pushing that key
then allows for selection of a number of data types in the various boxes.
To unlock the hot keys and allow for additional data selections go to the Main menu as described on page 18.
Then select HOT KEYS. Exit the menu back to the normal operating screens. You will see a right hand arrow
above key 5 when any key is pressed.
The Right Arrow button allows the choice of an individual gauge. The choices available are shown below. The
choices are presented in alphabetical order.
Example using a quad screen:
Data in NMEA 2000® format must be on the CANBus from an appropriate sensor to allow display of this
information. The i5601E display has the capability of displaying additional information as other devices with
NMEA 2000® communication capabilities are added to the vessel.
Page 20

User Settings and Factory Settings

Note:
Electronic Control System: Operation Manual for 6LY3 Series Engines