How To Select The Picture Mode; How To Customize Your Own Picture Status; Sound Control Functions; How To Choose Audio Mode - Haier TFT-LCD TELEVISION L32K3 User Manual

Basic Receiving and Playing Operations

How to select the picture mode

A
MENU to display main menu on the screen, and
Press
then press 3 /  to select the Picture menu, afterwards
6
5
press / to enter the option to be adjusted.
6
5
B
Press / to move the cursor to the option to be
adjusted, and then press
Vivid/Soft/User.
You can also press P.MODE on the remote control to
select Standard/Vivid/Soft/ User mode.
Standard
The picture brightness and hue are moderate.
Vivid
The picture is vivid, bright and dynamic.
Soft
The picture is soft and in light color.
User
The picture effect is set by yourself to your preference.

How to customize your own picture status

A
MENU to display main menu on the screen,
Press
and then press 3 / 
5
afterwards press
adjusted.
6
5
B
Press / to move the cursor to the option to be
adjusted, and then press
desired effect.
menu
Contrast
Brightness
Color
Sharpness
Tint
Picture Mode
Aspect Ratio
Palette
Reset
Sound Tuning
Contrast
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Brightness
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
Color
16 TFT -LCD television Owner's Manual
3 /  to select Standard/
to select the Picture menu,
6
/ to enter the option to be
3 /  to adjust it to your
50
50
50
0
50
Standard
Full Screen
Standard
OK
OK
This will adjust the saturation level of the colors to suit
your personal preference.
Sharpness
This will adjust the sharpness of fine details in the picture.
Tine
Allows you to select the color mix (Tine) of the picture.
Picture Mode
Select the mode of picture(Standard/Vivid/Soft/User).
Aspect Ratio
Select the mode of Aspect Ratio(Full screen/4:3/
Zoom/Cinema/Panorama).
Palette:
6
5
Press / to select the Palette option, and then
press  to enter its submenu, and finally press
6
5
/ to select a toner pattern from six patterns (User,
Standard, 6500K, 7300K, 8500K and 9300K) to your color
preference. Normally, the Standard mode is selected.
If the User mode is selected, press
the palette menu, (as shown in the below figure),
and then press 3 / 
range of 2500K~15000K from warm color to cold
color, afterwards press
benchmark is selected for adjustment, the original
adjustment data will be automatically cleared.
menu
Standard
+50
Warm1
Warm2
0
Cold1
Cold2
User
-50
Sound Tuning
Reset
Return to factory default settings.

Sound Control Functions

How to choose audio mode

A
MENU to display main menu on the screen,
Press
and then press 3 / 
5
afterwards press
adjusted.
6
5
B
Press / to move the cursor to the option to
3 
/ to enter
to select a benchmark in the
6
5
/ to adjust; if a different
Palette
to select the Sound menu,
6
/ to enter the option to be