Switching On/Off The Tv Set; Choose The Menu Language; Choose The Input Source; Searching Channel - Haier TFT-LCD TELEVISION L32K3 User Manual

help you with the TV operation.

Switching ON/OFF the TV set

A
First, connect power cord correctly and the power
indicator will light.
B
Press POWER on the remote control again.
C
If you want to exchange to standing by status,
please press down POWER on the remote control
D
Disconnect the power supply or unplug the
television if it is intended to completely cease the
television performance.

Choose the Menu Language

When you satisfied with your set for the first time,
you must select the language which will be used for
displaying menus and indications.
A
MENU and
Press 3
6
5
B
button to select Function menu.
Press /
C
Select a particular language by pressing
3 /  repeatedly.
D
When you satisfied with your choice, press
return to normal viewing.
Language
Menu Timeout
Picture Optimize
Background
Black Stretch
PIP
Sound
Tuning

Choose the Input source

If the TV is not in TV mode, press SOURCE on the remote
control unit, and signal source menu will be displayed
on the TV screen (as shown in the below figure). Press
6
5
to select the TV option, and press OK to confirm
/
the switching to TV input terminal. After switching, the
signal source menu disappears, and at the upper right
corner of screen displays the information of current
to select Function menu.
/ 
MENU to
English
15s
on
on
Adjust
Basic Receiving and Playing Operations
signal source.
Pressing this key repeatedly can exit from the signal
source menu.
In case of no other operation, the signal source menu
will automatically disappear upon reaching the OSD
disappearance time preset in the main menu.
Component1
Component2
 
/

Searching Channel

In this section, how to use the remote control to set
channel is explained. You can also use buttons on the TV
set to set channel.

Channel Edit

A
MENU on the remote control unit or MENU
Press
on the TV's front panel to display main menu,
and then press 3 /
Channel Edit
Auto Search
Prog. Exchange
Sound Tuning
6
5
B
Press / to select the Channel Edit
option, and then press OK to enter submenu.
TFT -LCD television Owner's Manual
USB
PC
HDMI1
HDMI2
HDMI3

OK/ :OK
:Move
 to select Tuning menu.
13