Auto Search - Haier TFT-LCD TELEVISION L32K3 User Manual

Basic Receiving and Playing Operations
menu
Channel Edit
Search
Fine Tune
Color System
Sound System
Skip
Sound Tuning
Search
6
5
to select the Search option, and finally
Press /
3 
press / to start manual search. Upon finding a
program, the search will automatically stop, and the
program will be stored onto the current channel.
You may stop the search by pressing OK or MENU .
Fine Tune
6
5
Press / to select the Fine Tune option, and
3 
then press / to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally, the
optimal picture effect can be obtained without fine
tuning when watching TV programs, and fine tuning
is to meet the need of adjusting a certain program.
Color system
6
5
Press / to select the Color Systems option,
and then press 3 
/
system.
The TV is designed with three systems for your
choice, i.e. Auto, PAL , SECAM and NTSC. Generally,
the system is set as Auto and it is not necessary to
make an adjustment. The system is normally set as
Auto during auto search.
Sound system
The TV is designed with four systems for your
choice, i.e. D/K, M, B/G and I. Generally, it is not
necessary to adjust the system. The system is
normally set as DK during auto search.
Skip
When the skip is set ON, the channel will be
skipped when pressing CH ∧ or CH ∨ and only can
be selected by pressing 0-9 numerical keys.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
14 TFT -LCD television Owner's Manual
40.00MHz
UP
DOWN
40.00MHz
PAL
D/K
ON
to select correct color
2. Do the above steps again.
to set Skip as Off.
3. Press 3 
/

Auto search

A
MENU on the remote control to display main
Press
menu, and then press
menu. (Note: Only when Tuning Lock in the H. Lock
menu is Off can the Channel menu be selected.)
menu
Channel Edit
Auto Search
Prog. Exchange
Sound Tuning
6
5
B
press / to select the Auto Search option, press
OK to enter the auto search menu, afterwards press
3  to select the Confirm option, and finally press
/
OK to confirm the starting of auto search.
menu
Sound Tuning
C
During auto search, the scale value on the progress
bar is continually increasing, indicating the auto
search is in progress. After finishing the auto search,
the TV will play the channel starting the auto search.
To stop the search in halfway, just press MENU/OK,
and the TV will play the first searched channel.
menu
Auto Search
Auto Searching
Found Channel(s):2
Frequency:25NHz
Sound Tuning
to select Tuning
3 / 
40%
Cancel