vita VACUMAT 6000 M Instructions For Use Manual
  1. Manuals
  2. Brands
  3. vita Manuals
  4. Furnace
  5. VACUMAT 6000 M
  6. Instructions for use manual

vita VACUMAT 6000 M Instructions For Use Manual

Hide thumbs Also See for VACUMAT 6000 M:
Table of Contents

Advertisement

Quick Links

Download this manual
VITA VACUMAT
6000 M
®
Instructions for use
VITA Farbkommunikation
VITA Farbkommunikation
VITA shade determination
VITA shade communication
VITA shade reproduction
VITA shade control
Date of issue: 2022-01
VITA – perfect match.
1626-1 Vacumat 6000 M_V07.indd 1
13.01.22 12:51

Advertisement

Table of Contents
loading

Related Manuals for vita VACUMAT 6000 M

Summary of Contents for vita VACUMAT 6000 M

  • Page 1 VITA VACUMAT 6000 M ® Instructions for use VITA Farbkommunikation VITA Farbkommunikation VITA shade determination VITA shade communication VITA shade reproduction VITA shade control Date of issue: 2022-01 VITA – perfect match. 1626-1 Vacumat 6000 M_V07.indd 1 13.01.22 12:51...
  • Page 2 1626-1 Vacumat 6000 M_V07.indd 2 13.01.22 12:51...

  • Page 3: Table Of Contents

    2.2 Intended use 2.3 Insulation material of the firing chamber 2.4 General safety and hazard warnings 3 Scope of delivery 3.1 Control unit of VITA vPad 3.2 Accessories (can be purchased separately) 4 Technical information 5 Technical data 5.1 Dimensions / weights 5.2 Electrical data...

  • Page 4: Introduction

    (maintenance, inspection, repairs), either with or on the device. We hope that you will find using the VITA VACUMAT 6000 M to be an enjoyable and successful experience. Copyright These instructions for use must be treated as confidential.

  • Page 5: Safety Information

    The manufacturer is not responsible for damage caused by not following the instructions. We hope that you will find using the VITA VACUMAT 6000 M to be an enjoyable and successful experience. 2.1 Pictograms used General warning sign This pictogram warns of hazards and risks.

  • Page 6: Intended Use

    6000 M ® 2.2 Intended use The firing, sintering and press furnaces from VITA Zahnfabrik were designed and built for use in dental technology. Are they used for firing, sintering and pressing dental-specific materials. Any other or additional use, such as heating food, processing hazardous substances or products, other than those intended for the firing process, is considered improper.

  • Page 7: General Safety And Hazard Warnings

    – Place on a non-flammable surface. – Maintain a safe distance from walls and furniture. – Do not place the VITA vPad control unit directly in the heat radiation area of the firing chamber. – Do not place any flammable objects, liquids or gases in the vicinity of the device.

  • Page 8: Scope Of Delivery

    • 1 Instructions for use 1626/1 3.1 Control unit VITA vPad The VITA VACUMAT 6000 M can be equipped with the following control units: • VITA vPad comfort • VITA vPad excellence The VITA Switchbox II with connection cable is also required for the...

  • Page 9: Technical Information

    – controlled rapid cooling and energy-saving night mode (VITA Energy Efficiency) • Operate up to four furnaces using just a single VITA vPad control unit • Use the VITA MultiPump to supply up to four furnaces with only one vacuum pump •...

  • Page 10: Ambient Conditions

    VITA vPad comfort or VITA vPad excellence and has the following safety and monitoring features: • automatic prevention of condensation in the firing chamber (VITA AntiCon) • automatic temperature adjustment to +/-1 °C every time a program is started (VITA AutoAdjust) •...

  • Page 11: Installation And First Use

    • Green – device in standby operation • Blue – program active • Red – error Read the corresponding instructions for use for the VITA vPad. 8.3 Fuses On the back of the device (see Section 9.2) there are two fuses for the device.

  • Page 12: Information About The Identification Plates

    Safety Information! For information about the connections, refer to Section 9.2 • Attach the connection cable to the VITA vPad control unit and the furnace. • Plug in the status display • Connect the vacuum pump, electrical connection and tubing connection.

  • Page 13: Switching Off The Device Or Stopping Its Operation

    If the fan fails, an error message is shown on the display (for information about this, refer to the Error Messages section of the VITA vPad instructions for use). For safety reasons, the device should not be operated without a fan. The upper cover of the firing chamber and the openings in the rear cover must not be closed or blocked.

  • Page 14: Mains Power Supply Failure

    The warranty and liability are based on the terms and conditions stipulated in the contract. In the event of software modifications without the knowledge and approval of VITA Zahnfabrik H. Rauter GmbH & Co. KG, all liability and warranty claims are invalidated. 13.1 Spare parts Spare parts must comply with the technical requirements specified by the manufacturer.

  • Page 15: Alphabetical Table Of Contents

    Connecting the device to the Switching off the device mains voltage Copyright Technical data Technical information Device connections Dimensions/weights Disposal VITA vPad comfort VITA vPad excellence Electrical data Fuses General description Guarantee Identification plates Installation and first use Installation location...
  • Page 16 The VITA Modulbox is not necessarily a component of the product. Date of issue of this information: 2022-01...

Table of Contents