Related Manuals for vita ZYRCOMAT 6100 MS
Summary of Contents for vita ZYRCOMAT 6100 MS
- Page 1 VITA ZYRCOMAT 6100 MS ® Operating manual VITA Farbkommunikation VITA Farbkommunikation VITA shade determination VITA shade communication VITA shade reproduction VITA shade control Date of issue: 02.19 VITA – perfect match.
- Page 2 VITA ZYRCOMAT 6100 MS – developed and manufactured entirely in Germany Dear Customer, Congratulations and thank you for choosing the VITA ZYRCOMAT 6100 MS sintering furnace! The VITA ZYRCOMAT 6100 MS is manufactured using the highest quality standards and is equipped with modern hardware and software – for easy and safe operation.
-
Page 3: Table Of Contents
3.1 Scope of supply for VITA ZYRCOMAT 6100 MS ... . 11 3.2 VITA System Solutions ....... . 12 Technical data / Information 4.1 Specification . -
Page 5: The Modular System
Control units Note: • To operate the VITA ZYRCOMAT 6100 MS, use the VITA vPad comfort or VITA vPad excellence control unit. VITA vPad comfort is a control unit for controlling one firing device. VITA vPad excellence is a control unit for controlling up to four firing devices. -
Page 6: The Sintering Oven
Connection for VITA vPad comfort/ Mains power supply connection VITA vPad excellence/VITA SWITCHBOX Note: • What? High quality sintering furnace for reliable sintering results. • What for? For sintering VITA YZ zirconia, as well as all common ZrO and Al -based framework materials. -
Page 7: Accessories
Note: • What? Supplied accessory set for comfortable sintering guidance. • What for? For reliable sintering using the VITA ZYRCOMAT 6100 MS. Please note: • Place the sintering dish in the center on the sintering stand. Double-level sintering is possible when you stack with the VITA sintering dish support. -
Page 9: First Use
• Please start the program only if the sintering stand is set up. VITA vPad comfort: Note: • The VITA vPad comfort does not offer any guided initial setup. • Before starting the program for the first time, please set the status display, insert the metal ring, turn it clockwise and let it engage. -
Page 10: Set Up The Sintering Unit
1. The modular system 2. First use 3. Scope of supply/system solutions 2.2 Set up sintering unit • Please ensure that the following conditions are met. Please note: • Set the device up in a dry, heated room. The distance between the sintering unit and the next wall should be at least 50 cm. •... -
Page 11: Scope Of Supply For Vita Zyrcomat 6100 Ms
Sintering dish Tongs 150 g ZrO spheres Status display/light bar Connecting cable for control unit (VITA vPad comfort or VITA vPad excellence) Power cable 1) 230 V EU 2) 230 V GB 3) 230 V CN 4) 230 V CH... -
Page 12: Vita System Solutions
Luting *) Optional: Shading with VITA YZ COLORING LIQUIDs or VITA YZ SHADE LIQUIDs is an optional process step. This is not necessary with precolored YZ blanks. **) Optional: Veneering with VITA VM 9 is an optional process step and is not necessary for the monolithic restoration concept. -
Page 13: Specification
European Union (EU). Old units can be returned to VITA Zahnfabrik. CE marking VITA ZYRCOMAT 6100 MS complies with the applicable regulations of the European Union (EU). The declaration of conformity can be requested from VITA (Regulatory Affairs Department) at: www.vita-zahnfabrik.com... -
Page 14: Informations
3. Scope of supply / system solutions 4. Technical data / Information 5. Additional information 4.4 Information Basic information on the instrument design • The instrument is designed according to state-of-the-art technology and recognized safety standards. • However, inappropriate use may endanger the health and safety of the user or third parties and lead to a risk of damage to the instrument and other material property. -
Page 15: Safety Functions
4. Technical data / Information 3. Scope of supply / system solutions 5. Additional information 4.5 Safety functions The sintering unit has the following safety and monitoring features: 1. Temperature sensor monitoring 2. Power supply failure protection 3. Obstruction sensor 4. -
Page 16: Cleaning The Sintering Unit And Control Unit
• The cleaning firing is described in the operating manual of the VITA vPad comfort or the VITA vPad excellence. Consult the operating manual of the control unit for information about the cleaning firing. -
Page 17: Vita Warranty And Consumer Protection
4. Technical data / Information 5. Additional information 5.1 VITA warranty and consumer protection The VITA warranty and consumer protection document can be found on the homepage or at the following link: https://www.vita-zahnfabrik.com/de/oefen/Vita-garantie-50694,27568.html 5.2 Update messenger Software updates are available as a download at the VITA Zahnfabrik website. To automatically have the latest device information and updates e-mailed to you, an option to register is provided at www.vita-zahnfabrik.com/update-messenger. - Page 18 NOTES...
-
Page 19: Hotline And Support
Technical hotline Mr. Udo Wolfner and his team If you have technical questions (Internal Sales Department) will concerning VITA product solutions, you be glad to assist you with orders or can contact our technical specialists questions about the delivery, product data Mr. - Page 20 The VITA Modulbox is not a required component of the product. Date of issue of this product information: 02.19 After the publication of this information for use, any previous versions become obsole- te.
Need help?
Do you have a question about the ZYRCOMAT 6100 MS and is the answer not in the manual?
Questions and answers