Grandstream Networks GXP21 Series User Manual page 17

No image found
1. Attach the phone stand or wall mount to the back of the phone where there are slots.
2. Connect the handset and main phone case with the phone cord.
3. Connect the LAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side ofthe
router) using the Ethernet cable.
4. Connect the 12V DC output plug to the power jack on the phone and plug the power adapter into
an electrical outlet. If PoE switch is used in step 3, this step could be skipped.
5. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait
for the date/time display to show up.
6. Using the keypad configuration menu or phone's embedded web server (Web GUI) by entering
the IP address in web browser, you can further configure the phone.
GXP2200EXT Module
The GXP2140/GXP2170 is expandable with GXP2200EXT modules. GXP2140/GXP2170 supports up
to 4 extension modules, adding 160 fully programmable phone extensions to the phone.
GXP2200EXT board package contains:
GXP2200EXT Main Case Yes (1)
GXP2200EXT Stand
RJ11-RJ11 Cable
Connector Plate
Screws
Quick Installation Guide Yes (1)
Table 10: GXP2200EXT Packaging
The GXP2200EXT board is an additional accessory for the GXP2140/GXP2170 and is not included in
the GXP2140/GXP2170 box.
To set up the GXP2200EXT board with the GXP2140/GXP2170, please follow the steps below:
1. On the back of the GXP2140/GXP2170 and the GXP2200EXT, there are slots for connector
plate. Attach the connector plate between the slots for GXP2140/GXP2170 and the
GXP2200EXT;
Page 17
Yes (1)
Yes (1)
Yes (1)
Yes (4)
Grandstream Networks
GRANDSTREAM NETWORKS