Electrical Safety - Black & Decker ST182320 Original Instructions Manual

EngliSh

Electrical safety

Your charger is double
insulated; therefore no earth
wire is required. Always
check that the mains voltage
corresponds to the voltage
on the rating plate. Never
attempt to replace the
charger unit with a regular
mains plug.
♦ If the supply cord is damaged,
it must be replaced by the
manufacturer or an authorised
BLACK+DECKER Service
Centre in order to avoid a
hazard.
labels on appliance
The following pictograms are
shown on the tool along with the
date code:
Read the manual prior to
operation.
Wear safety glasses or
goggles when operating this
appliance.
Wear suitable ear protectors
when operating this
appliance.
12
Always remove the battery
from the appliance before
performing any cleaning or
maintenance.
Beware of flying objects.
Keep bystanders away from
the cutting area.
Do not expose the appliance
to rain or high humidity.
Directive 2000/14/EC
96
guaranteed sound power.
Features
This appliance includes some or all of the following features.
1. Trigger
2. Lock off button
3. Handle
4. Auxiliary handle
5. Height adjust collar
6. Trimmer head
7. Edge guide
8. Guard
9. Spool housing
10. Battery
Charging the battery (Fig. A)
The battery needs to be charged before first use and
whenever it fails to produce sufficient power on jobs that were
easily done before.
The battery may become warm while charging; this is normal
and does not indicate a problem.
Warning! Do not charge the battery at ambient temperatures
below 10 °C or above 40 °C. Recommended charging
temperature: approx. 24 °C.
note: The charger will not charge a battery if the cell
temperature is below approximately 10 °C or above 40 °C.
The battery should be left in the charger and the charger
will begin to charge automatically when the cell temperature
warms up or cools down.
♦ Plug the charger into an appropriate outlet before
inserting the battery pack.
♦ Insert the battery pack into the charger.