Page 5
Mounting on Left & Right Door RIGHT LEFT Hinges on Hinges on outside of outside of door are on door are on the Right the Left Peg on stop cam Peg on stop cam is on the right side is on the left side Back View Back View View of the lock...
Page 6
JOINT ERECT LOCK ASSEMBLY MEASUREMENTS 22 mm Axle cam 38 mm Axle cam RECESSED COVER ASSEMBLY MEASUREMENTS...
Page 7
OVERLAPPING / EXTERNAL COVER ASSEMBLY MEASUREMENTS Right cover on the body 4 mm Hole 3 mm 27 mm 42 mm 16 mm Hole 22 mm cam...
Page 8
1. Place mounting template on door and mark upper mounting screw hole and lower cylinder hole 2. Drill mounting screw hole and cylinder holes. 3. Continue steps 4-7 above Note: Before drilling holes, make sure miniLock is positioned with proper clearance for cam to work.
Page 9
WARNINGS FOR MOUNTING: Pull the transparent “Remove to Start” tag coming out of bat- tery cap at the back of the lock and activate the lock. Read the user manual and apply password change and opening/closing operations several times before the mounting of the lock.
Need help?
Do you have a question about the miniLock and is the answer not in the manual?
Questions and answers