Haier DWL3025 Installation Manual page 18

6. Stand dishwasher upright.
7. The dishwasher must be secured to the cabinet.
There are two brackets on top of the dishwasher
that usually can be attached to the countertop. If
this is not possible,the brackets "M" may be moved
to the sides of the dishwasher.
If you are going to attach the dishwasher to the
countertop,skip to step 13.
If you are going the attach the dishwasher to the
sides of the cabinet, follow steps 8 through 12.
8. To remove the brackets from the top,flatten tab "N"
at back of brackets with pliers,and pull the brackets
out of the slots "O".
9. Break off the end of the bracket along the scored
line "P".
10. Open dishwasher door and place towel "Q" over
pump assembly and spray arm of dishwasher.This
will prevent screws from falling into pump area
when securing dishwasher to countertop.
11. Open dishwasher door and push the plastic buttons
"R" out of the side of the tub.
NOTE: Save the buttons to cover the holes after
dishwasher is installed.
12. Push bracket into slot "S" on the side of
dishwasher,and bend tab in towards the side of the
dishwasher so that it keeps the bracket in place.
17