Advertisement
3.1.7 Removing the front VFD board
(See Fig.17)
• Remove the top cabinet, rear cabinet, amplifier board, 5DVD
changer mechanism assembly and front cabinet assembly.
(1) From the inside of the front cabinet assembly, remove the
three screws Q attaching the front VFD board.
(2) Take out the front VFD board from the front cabinet assem-
bly and disconnect the card wire from the connector
FW102 on the forward side of the front VFD board.
Q
Front VFD board
Front cabinet assembly
Fig.17
FW102
(No.MB517)1-13
Advertisement
