11-Fault Codes
string of codes appears on the display, a fault has occurred. Please refer to the following
instructions.
Code Cause
Drain pump failure
The condenser thermal sensor is open-circuited or
short-circuited.
Temperature of the laundry in the drum does not change. Contact the customer service.
Communication failure between PCB and display.
The lint filter is blocked and needs to be emptied.
The water tank is full and needs to be emptied.
Network configuration failure
22
Solution
Contact the customer service.
Contact the customer service.
Contact the customer service.
Empty the lint filter and then
replace it and check the lint filter is
not damaged. Check there is nothing
else stuck in the lint filter holder whick
may be blocking the air flow.
Check and empty the water tank,
if using drain hose, check whether
the water tank or drain hose is
blocked.
Turn off the dryer.
NZ AU