Table of Contents
Advertisement
3.3
Function
3.3.1
Danger levels
3.3.2
Test mode
Building Technologies
Fire Safety & Security Products
Manual call points can transmit the following danger levels to the control panel:
Danger level
Meaning
0
No danger
3
Alarm
Comment
The evaluation of the danger level and the decisions to be taken (e.g. activation of
remote transmission) are configured in the control panel.
A test mode can be set on the control panel to test the manual call point. When in
test mode, alarms from the manual call points are not forwarded by the control
panel.
The manual call points can be tested using the key.
See also
Testing detector with the key [
Structure and function
Comment
Normal condition
Fire
24]
A6V10201150_a_en_--
15
05.06.2008
Advertisement
Table of Contents
