Advertisement
Motherboard Layout:
JAUD1
JSPDO1
JUSB1
SATA1
JSPI1
SATA2
JLPT1
JPWR1
IDE1
JCI1
JCOMP1
CPUFAN1
Mini-PCIe
JFP1
JPW1
Jumper / Connector
Name
CPUFAN1
IDE1
JAUD1
JCI1
JCOMP1
JFP1
JLPT1
JPW1
JPWR1
JSPDO1
JSPI1
JUSB1
WARNING: Electrostatic Sensitive Device (ESD)
Static electricity can easily damage your motherboard and will void your motherboard warranty. Keep the motherboard
SO-DIMM
and other system components in their anti-static packaging until you are ready to install them. Touch a grounded surface
before you remove any system component from its protective anti-static packaging. Unpacking and installation should be
done on a grounded, anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same
points as the anti-static mat. During configuration and installation touch a grounded surface frequently to discharge any
static electrical charge that may have built up in your body.
motherboard or a peripheral card. Handle the motherboard and peripheral cards either by the edges or by the peripheral
card case-mounting bracket.
WARNING: Misplaced Jumper Damage
Incorrect jumpers and connectors settings may lead to damage to your motherboard and will void your motherboard
warranty. Please pay special attention to not connect these headers in the wrong direction. DO NOT change ANY jumpers
while the motherboard has power.
Description
Note
CPU fan
3 pin
IDE (PATA)
40 pin
audio header
2x pin
chassis intrusion
2 pin
COM port power
3 pin
front panel header
2x5 pin (keyed)
printer
2x13 pin (keyed)
power in
4 pin
power out
4 pin
S/PDIF
3 pin
SPI header
2x5 pin (keyed)
front USB header
2x5 pin (keyed)
Avoid touching the components when handling the
Advertisement
