BCM BI250-945GSE User's Quick Start Card

Package Contents:
One BI250-945GSE
One Driver CD/DVD
One User's Quick Start Card
BI250-945GSE
Inside the BI250-945GSE
One MX945GSE4 Motherboard
One SATA & Power Cable
One HDD Bracket
MX945GSE4
SATA & Power cable
HDD Bracket
BI250-945GSE
Intel Atom™ N270 Processor
®
User's Quick Start Card
Version 1.2
Responsibility:
This manual is provided "As-Is" with no warranties of any kind, expressed or implied, including, but not limited to the
implied warranties or conditions of this product's fitness for any particular purpose. In no event shall we be liable for any
loss of profits, loss of business, loss of data, interruption of business, or indirect, special, incidental, or consequential
damages of any kind, even the possibility of such damages arising from any defect or error in this manual or product. We
reserve the right to modify and update the user manual without prior notice.
WARNING: CMOS Battery Damage
Replace your system's CMOS RAM battery only with the identical CR-2032 3V Lithium-Ion coin cell (or equivalent) battery
type to avoid risk of personal injury or physical damage to your equipment. Improper installation might cause battery to
explode. Always dispose of used batteries according to the manufacturer's instructions, or as required by the local
ordinance (where applicable). The damage due to not following this warning will void your motherboard's manufacturer
warranty.
Perchlorate Material- Special Handling May Apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Additional Information:
Additional information on setting the motherboard up can be found in the MX945GSE4 User's Manual in the provided CD
or DVD ROM. The Online User's Manual and FAQ/Knowledge Base can be found on our website by visiting our website:
http://www.bcmcom.com. If your question is not answered in our FAQ/Knowledge Base, visit our forums and post your
messages or submit a new FAQ through FAQ Submittal form for us to add your question in our FAQ with our answer.
ATTENTION: Incorrect BIOS Setup
If you do not know how to handle BIOS setup or how to set it up properly, it is strongly advisable that you do not modify
any of the settings than otherwise instructed in the User's Quick Start Card. Even a seemingly small incorrect adjustment
or modification in the BIOS setup can render your system unstable or unusable. Incorrect BIOS setup is not covered by
your motherboard's manufacturer warranty. Try Clear CMOS information when system does not boot after BIOS settings
change.
http://www.bcmcom.com