Panasonic WV-CP450 Operating Instructions Manual page 20

• Opening the Setup Menu
Press and hold down
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
SYNC
WHITE BAL
LENS DRIVE
END SET UP DISABLE
The CAM SET UP menu appears on the monitor as
shown above.
Check the current settings on the menu.
Refer to the sections below for a detailed description of
menu items. If you decide not to make any changes
after checking the current settings, move the cursor to
END at the start of the bottom line, and press
close the CAM SET UP menu and return to normal
camera picture mode.
Note: If no button is pressed for 6 minutes while the
CAM SET UP menu or any other setting menu is
displayed, displaying the menu is automatically
canceled and the mode returns to the normal cam-
era picture.
for a second or longer.
Blinking
OFF
ALC
---
ON
INT
ATW
DC
CAMERA ID
ALC/ELC
SHUTTER
AGC
SYNC
WHITE BAL
LENS DRIVE
• Editing the CAM SET UP Menu
Important Notices:
When the words SET UP DISABLE appear on the
bottom line of the CAM SET UP menu, you cannot
to
change the currently active settings. This is to pre-
vent accidental changing of the settings.
To edit the CAM SET UP menu (change settings), use
and or
UP DISABLE in the bottom line.
Press . SET UP DISABLE changes to SET UP
ENABLE. Move the cursor to END, then to the item(s)
you want to change.
-17-
** CAM SET UP **
OFF
ALC
---
ON
INT
ATW
DC
END SET UP DISABLE
and to move the cursor to SET