Advertisement

(Lens Option)
please read these instructions carefully and save this manual for future use.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is interned to alert
the user to the presence of
uninsulated "dangerous volt-
age" within the product's enclo-
SA 1965
sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point within
an equilateral triangle is intend-
ed to alert the user to the pres-
ence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
SA 1966
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
PREFACE
Panasonic's WV-CP460 (WV-CP464) series color digital camera introduces a new level of
high picture quality and high resolution through the use of a 1/3-inch interline transfer CCD
image sensor having 771 horizontal pixels (picture elements), and digital signal processing
LSIs. This model offers cutting-edge technology for advanced video surveillance.
PRECAUTIONS
1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service person for servicing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
3. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Turn the power off immediately and ask a qualified service person for servicing.
Moisture can damage the camera and also create the danger of electric shock.
4. Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton
tipped applicator and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never
aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may
be caused.
7. Do not operate the camera beyond the specified temperature, humidity or power
source ratings.
Use the camera under conditions where temperature is between –10°C - +50°C (14°F -
122°F), and humidity is below 90%. The input power source is 120 V AC 60 Hz for WV-
CP460 and DC 12 V/AC 24 V for WV-CP464.
Caution:
To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for
the DC 12 V or AC 24 V Input Terminal.
Before attempting to connect or operate this product,
Color CCTV Cameras

Operating Instructions

Model No.
N0100-1020
YWV8QA5377BN
NOTE: This equipment has been tested and
found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interfer-
ence when the equipment is operated in a
commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference in
which case the user will be required to correct
the interference at his own expense.
FCC Caution: To assure continued compli-
ance, (example - use only shielded interface
cables when connecting to computer or
peripheral devices). Any changes or modifica-
tions not expressly approved by the party
responsible for compliance could void the
user's authority to operate this equipment.
The serial number of this product may be found
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
WV-CP460
WV-CP464
Printed in Japan
N 19
For U.S.A

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic WV-CP460

  • Page 1: Operating Instructions

    To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. PREFACE Panasonic's WV-CP460 (WV-CP464) series color digital camera introduces a new level of high picture quality and high resolution through the use of a 1/3-inch interline transfer CCD image sensor having 771 horizontal pixels (picture elements), and digital signal processing LSIs.
  • Page 2: Major Operating Controls And Their Functions

    (5) Electronic Shutter Function 2. Signal-to-noise ratio of 50 dB 3. Minimum illumination of 0.8 lx (0.08 footcandle) with F 1.4 lenses. 4. Minimum illumination of 0.4 lx (0.04 footcandle) with Panasonic aspherical high speed (F0.75) lenses. 5. 480 lines of horizontal resolution...
  • Page 3: Video Cable

    6. High quality picture: (a) 2H type vertical enhancer for greater picture sharpness (b) Chroma averaging circuit for better color signal-to-noise ratio (c) Minimum of aliasing on fine objects (d) Expanded dynamic range by use of knee circuit (e) Highlight aperture correction for greater picture detail of bright objects 7.
  • Page 4: Installation Of Auto Iris Lens Connector

    Installation of Auto Iris Lens Connector Install the lens connector (YFE4191J100) when using a video drive ALC lens. The installation should be made by qualified service personnel or system installers. (1) Cut the iris control cable at the edge of the lens connector to remove the existing lens connector and then remove the outer cable cover as shown in the diagram below.
  • Page 5: Camera Setup Menu

    SETUP 1. CAMERA SETUP MENU This camera utilizes a user setup menu that is displayed on-screen. • Opening the Setup Menu Press and hold down more. The CAM SET UP menu appears on the monitor as shown at right. Check the current settings on the menu. Refer to the sections below for a detailed description of menu items.
  • Page 6: Setting Procedures

    SUPER-D2 MASK SET LEVEL SUPER-D2 LEVEL Character Area Command Editing Area . Then move Highlighted WV-CP460 is kept pressed for a sec- ** ALC CONT ** BACK LIGHT COMP ...I... ** ALC CONT ** BACK LIGHT COMP ...I...
  • Page 7: Shutter Speed Setting (Shutter)

    2-2. ALC Mode with SUPER-D2 OFF and ELC Mode Note: If ELC is selected, set MASK SET according to this procedure. 1. Move the cursor to the SUPER-D2 parameter and select OFF. (When you select ELC, SUPER-D2 is not avail- able.) The item MASK SET appears on the menu.
  • Page 8 1. Move the cursor to the SYNC parameter and select line-lock (LL) or internal (INT). 2. Press If LL is selected, the SYNC menu appears. (If INT is selected, the synchronization mode is automatically set to internal sync pulse, and the menu is not displayed.) Important Notice: 1.
  • Page 9: White Balance Setting (White Bal)

    8. Adjust the horizontal phase by pressing 6-3. Line-lock Sync Mode (LL) Note: The line-lock (LL) sync mode is not available when the camera operates on DC power. 1. Move the cursor to the SYNC parameter and select LL. Note: The settings in this menu can be made only when the multiplexed vertical drive signal (VD2) is not supplied to the camera.
  • Page 10: Motion Detector Setting (Motion Det)

    Because the alarm signal is multiplexed on the video signal, it may be mistakenly inter- preted by other video equipment as a time code signal. Therefore, when the camera is not used in a Panasonic Intelligent CCTV System select OFF to prevent the above from occurring.
  • Page 11: Specifications

    WV-LF4R5C3A, WV-LF9C3A Panasonic Security and Digital Imaging Company A Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Regional Offices: Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Southern: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 (770) 338-6838...

This manual is also suitable for:

Wv-cp464

Table of Contents